Click To Call(904) 479-2177Click To Get A Free Estimate
Couple on a dark sealed paver surface beside a brick garage and palm trees

Grip underfoot and color that survives chlorine

Pool Deck Paver Sealing in Highlands, FL

Call (904) 479-2177 for a free estimate on sealing the pavers around your Highlands pool.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 479-2177
Pool decks

Can someone seal my Highlands pool deck, and how soon will I hear back?

A local contractor takes pool deck paver jobs anywhere in Highlands, and you hear back within one business day, often within a few hours. The look at your deck and the written number are free, and nothing obliges you to book. Start by calling (904) 479-2177.

Picture the deck at the end of August: dull around the coping, gray in the shady corners, joints sunk low and a slick film where the sprinkler overspray lands. Sealing cleans all of that off, refills the sand and puts a coat on top that keeps the next summer from doing the same thing. Tell the contractor how often the family swims, then ask for a free estimate.

Call (904) 479-2177

Which Highlands neighborhoods get a pool deck estimate?

Every town in the list below has a page, and a contractor who covers Highlands can reach each one. The pool deck page here is for homes in Highlands itself, in ZIP 32218. If your street sits nearby and is not listed, call (904) 479-2177.

Sunny paver pool deck with a lounge chair beside the water

What makes a pool deck different from other paver jobs in Highlands?

Why does a Highlands pool deck take more of a beating than a driveway?

A driveway meets tires and oil. A pool deck meets water every day, plus sunscreen, bare feet, chlorine and an afternoon sun that cooks the surface. Unilock says decks and walks that see splash and sunscreen benefit from added resistance to moisture and mildew, and a Northeast Florida paver company says constant moisture exposure speeds up deterioration on pool deck pavers. A coat that suits a front walk may not suit the pool, so tell the contractor which surface you mean when you ask for a free estimate.

What does the sealer do for the joints between pool deck pavers?

Joint sand holds pavers in place, and pool decks lose it fast. A Northeast Florida washing company says summer storms pull sand out of pool decks and driveways, and that sealing over empty joints is how weeds come back. Unilock adds that sealing tightens the top of the joints so windblown seeds find fewer places to settle. Once the sand goes back in and the coat goes over it, the deck stays level underfoot, and (904) 479-2177 is the number to call to schedule a look.

Is gloss safe around a pool, or should the finish be matte?

Matte or satin is the safer choice beside a pool. Unilock lists slip hazard among the downsides of sealing and says matte sealers are the safer alternative, and its pros and cons page says a penetrating matte product keeps texture and traction while still protecting the surface. A Florida sealing company that specializes in pool decks adds that some contractors stir grip powder or sand into sealer to add traction, and says those textures wear down within a year. Ask what gives your deck its footing and how long it lasts. Questions like that are easy to raise when you ask for a free estimate.

One practical test beats any brochure. Have the contractor wet a small patch of sealed deck and step on it barefoot before the whole deck gets the coat. That takes a few minutes, and it answers the question for your feet. To book a test patch, call (904) 479-2177.

Pricing

What does sealing a pool deck in Highlands cost?

Published prices run from about $1.50 to $3.25 per square foot for the full clean, sand and seal. A cost site that tracks contractor estimates lists $2.20 to $3.25 for jobs under 500 square feet and $1.75 to $2.95 for jobs between 500 and 2,000 square feet. A Northeast Florida washing company gives $1.75 to $3.25 for the same bundle, and says stripping a failed coat sits higher. To get a figure for your own deck, ask for a free estimate.

The table below applies both ranges to common deck sizes. The first price column comes from the cost site's own size table, and the second applies the Northeast Florida range to the same area. Real quotes move with the deck's condition, its shape, how many steps and corners it has and how far the crew has to carry equipment.

Deck sizeCost site range (wash, sand, seal)Northeast Florida range
400 sq ft$880 to $1,300$700 to $1,300
700 sq ft$1,225 to $2,100$1,225 to $2,275
1,000 sq ft$1,750 to $2,950$1,750 to $3,250
1,500 sq ft$2,625 to $4,425$2,625 to $4,875

Cost site ranges are from HomeGuide's size table for sealing pavers, which includes pressure washing, joint sand and sealer. The right column multiplies $1.75 and $3.25 per square foot, the range a Northeast Florida washing company lists. A wash by itself runs $0.35 to $0.80 per square foot at the cost site, and a Northeast Florida paver company lists cleaning from $0.22 and sealing from $1.90 per square foot. Repairs, leveling and stripping failed sealer are normally extra.

Get a Free Estimate

Teenager and father relaxing on lounge chairs on a paver deck inside a screened pool enclosure

How does the work go on a deck with a screen cage?

The crew covers or moves furniture, protects the plants and screens and turns the sprinklers off. A surface cleaner then washes the deck so the finish is even and free of wand stripes, which is how a Northeast Florida washing company describes its method. Rust, tannin and mildew get their own cleaner. After that the deck dries, the joints get kiln dried sand and the sealer goes down. To plan around your enclosure, call (904) 479-2177.

Unilock asks for the sealer to go down in one session without stopping, then a dry roller pass to lift extra product, which keeps lap marks and glossy patches away. A cost site says a water-based sealer can go over a damp surface and a solvent-based one needs one to two days of drying after the wash. That is one reason a contractor may pick a product for your deck before anything else.

Which sealer type fits a pool deck, water-based or solvent-based?

A cost site compares the two. Water-based sealer is breathable, penetrates deeper, stabilizes the sand in the joints and can go over a damp surface, and it lists a price of $42 to $70 per gallon. Solvent-based sealer is shinier, lasts four to five years, costs $32 to $55 per gallon and is not breathable, so condensation can leave a white haze, and it needs pavers that are fully dry. Which one a contractor recommends depends on how glossy you want the deck and how much risk of moisture the product can take. Ask for the reason behind the pick when you ask for a free estimate.

Angi puts a gallon at around $30 covering about 250 square feet. That means the sealer itself is a small share of a pool deck bill, and wash, sand and labor are the rest. Anyone quoting a number far below the ranges above deserves a question about prep. Already holding a bid? Call (904) 479-2177 and compare it line by line.

Why choose us

Why do pool deck pavers lose their sand so quickly?

Water moves sand. A Northeast Florida washing company says summer storms drag it from pool decks and driveways, and that is the reason it re-sands before it seals. A Northeast Florida paver company says it uses clean, kiln dried sand and skips polymeric sand in Florida, because polymeric sand needs a long dry spell to set and one afternoon storm can wash it out of the joints. Another company that works in Central Florida lists sand washing out, weeds in the joints, ants building small sand piles and rocking pavers as the signs a deck needs attention. If you see any of them, call (904) 479-2177.

Ant piles by the coping and a joint that has sunk below the paver edge are the early signals. Fixing them costs less than relaying pavers later, and a coat over fresh sand helps the joint last through the next rainy season.

How do I know the sealer has failed on my deck?

Watch the water. A Northeast Florida paver company says that when water stops beading and soaks in fast, it is time for a new coat. Other signs are a chalky look, patches of white or cloudy film and spots where the sealer has peeled. Unilock says a whitish film points to trapped moisture, over-application or sealing over an incompatible product. Old sealer that has gone cloudy has to come off before a new coat, since covering it keeps the problem. Ask the contractor to test a small spot during the estimate visit, and ask for a free estimate.

The water test takes thirty seconds: splash a little on the deck and watch whether it beads or darkens the paver. Beads mean the coat is working. A dark spot that spreads means it has thinned out.

How is a Highlands home different for pool deck sealing?

A lot of the houses are not old. City-Data's breakdown of homes in ZIP 32218 puts more than half of them as built in 2000 or later, so many pool decks here are likely on their first or second coat cycle. Unilock says new pavers should wait out efflorescence, the white salt haze, which usually clears in two to three months and can take up to a year, before sealing. About 73 percent of the housing units in the ZIP are single-family houses, so backyard pools are a normal part of the neighborhood. To find out whether your deck is ready, ask for a free estimate.

The ground matters too. The soil in the area is mostly sand and clay, rainfall runs about 52 inches a year, and most of it falls in short, hard downpours between May and September. Sandy ground can shift under a deck, which is how pavers settle and joints open, and Unilock says a sealer cannot fix drainage or base problems. Call (904) 479-2177 if you suspect yours has moved.

Photos

What do sealed pool decks look like around Highlands?

Freshly sealed paver driveway beside a carport and palms beside a Highlands swimming pool
Sealed paver pool deck beside a Highlands swimming pool
Sealed paver patio with a covered pergola beside a Highlands swimming pool
Sealed paver walkway to a front door beside a Highlands swimming pool
Close view of freshly sealed pavers beside a Highlands swimming pool
Paver area with one cleaned half beside a dirty half beside a Highlands swimming pool
Contractor cleaning pavers beside a Highlands swimming pool
Contractor sealing or sanding pavers beside a Highlands swimming pool
Process

What are the steps from first call to a finished pool deck?

Most jobs follow six steps, and a contractor should be able to walk you through each one. Call (904) 479-2177 if you want the order for your own deck.

1. Look and measure

The contractor measures the deck, notes steps and corners and checks for loose, sunken or stained pavers.

2. Protect and treat

Plants, screens and electrical fittings are covered, and rust, mildew or tannin gets its own cleaner.

3. Wash and dry

A surface cleaner washes the pavers at moderate pressure, then the deck dries fully.

4. Sand the joints

Kiln dried sand fills each joint, settles and gets swept clean.

5. Seal in one pass

Sealer goes on in one session and a dry roller lifts the extra.

6. Walk the deck

You and the contractor check the finish, and you get the cure window in writing.

Typical materials: kiln dried joint sand, a deck cleaner matched to the stain and a sealer in the finish you chose. Typical equipment: a surface cleaner, a pump sprayer and a dry roller.

Questions

Questions people ask before sealing a pool deck

These answers come from the questions Google lists for this search and from homeowners near Highlands. For anything else, call (904) 479-2177.

How much do people charge to seal pavers?

A cost site that tracks contractor estimates puts a full wash, joint sand and seal at $1.50 to $3.25 per square foot, with jobs under 500 square feet at $2.20 to $3.25. A Northeast Florida washing company lists $1.75 to $3.25. A minimum job fee can lift a small deck.

Is it good to seal pavers in Florida?

For a pool deck, usually yes. Unilock, a paver maker, says decks and walks that see splash and sunscreen gain resistance to moisture and mildew, and it suggests UV resistance in sunny regions such as parts of Florida. Sealing is optional, so weigh it against a repeat cost.

What is a good coating for pool decks?

Look for a sealer made for wet areas with a low sheen. Unilock says high gloss can turn slippery when wet and that a penetrating matte product keeps traction. Ask the contractor to name the product and test a sample patch on your own deck.

How long do paver sealers last?

Three to five years is the common span from Unilock and a cost site, and a Northeast Florida paver company says two to five here. A pool deck sits at the short end more often than a back walk, since chlorine, splashing and full sun wear a coat down faster.

Is a wet look sealer too slippery for a Highlands pool deck?

It can be. Unilock lists slip hazard among the downsides of sealing and calls matte the safer option. A satin or matte finish keeps most of the color boost with better footing, so ask for a wet test patch before you agree.

Can the deck be sealed with the screened enclosure still up?

Yes, though the schedule changes. Unilock says shady, cooler spots may need about a day to dry before sealing, and the contractor has to shield screens and plants from overspray. Mention the enclosure when you ask for the number.

How long before my family can use the pool deck again?

Plan on a couple of days. Unilock asks for up to 48 hours of dry weather to cure, and a cost site says water-based products need 24 to 48 hours before light foot traffic while solvent products can take up to 72. The product label sets the real time.

Will a summer storm ruin a freshly sealed deck?

Rain on a coat that has not cured can cloud it or leave marks, so contractors wait for a dry window. Duval County gets brief, intense downpours with thunder from May through September, which is why dates often move a day or two.

Does pool chlorine damage sealed pavers?

It wears the coat down over time. A Northeast Florida washing company says full sun, pool chlorine and storms that rinse out the joints can pull a reseal closer to two years. Water that stops beading means a new coat is near.

What are the orange marks near my sprinkler heads at the pool?

Irrigation water that carries iron is the usual culprit. A Northeast Florida washing company says it needs a rust treatment, not more pressure, and the mark has to be gone before sealer goes on. Point the spots out at the estimate.

Close shot of wet look sealer deepening the color of freshly sealed pavers

What other paver jobs can a Highlands contractor quote?

If the deck is only one of the areas that needs work, ask for the driveway, patio or walkway on the same visit. Pick a page below or call (904) 479-2177.

Ready to get the pool deck pavers sealed in Highlands?

Send the short form or call, and a local contractor will look at the deck and reply within a business day, often sooner.

Call (904) 479-2177

Free, no obligation